Take a look at our Solid Iroko Driveway Gates (pair) - Palisade, manufactured from African Iroko direct from our own sawmill.
Height is calculated to the lower side (ie, hanging side), for example, 1.2m height would be 1.5m in the centre, the rise being approximately 300mm.
Standard sizes available from our drop down menu but if you require a custom size, please contact us for a bespoke quotation.
Timber
African Iroko
Configuration
Side hung - NO Ironwork supplied
Gate sections
70mm thick
Styles 110mm face
Visible from outside
Bottom Rail 110mm not visible as standard, visible upon request - please let us know.
If requested, Bottom Rail visible sections will be 160mm x 70mm
Head rail 110mm visible from outside
PTGV Board 15mm X 95mm
Joints and moulding
Mortise and Tenoned
Finish
Untreated as standard.
Osmo Oil UV Protection, 3 coats (optional at extra cost)
This is a supply only package fully mortise and tenoned and wedged.
Any general builder or joiner will be able to install these, but we can help over the phone with installation/advice if needed.
We would advise 1 day installation time with 2 people (recommendation only).
We do offer an installation service, please contact us for prices if you require this.
Some sections are very heavy, so lifting equipment may be required.